Note one: Ask experienced and qualified professionals to install
When install the faucet, try not to bump with hard objects, and try not to have cement, glue and other items left on the surface, so as to avoid damage to the surface coating gloss. If it is new housing, water supply pipe network is a new shop, the water will certainly be sand and other impurities, pay attention to the pipes before installation within the debris cleared, turn on the water until the water clean in a long time to install the faucet.
Note two: Shut strongly doesn’t mean tight
A lot of people are used to shut the faucet strongly. This is very undesirable. Because it can’t prevent leakage, and will damage the seal valve, leading to the tap off lax.
Note three: Good practice to ensure the faucet as good as new
To avoid rust, wipe the surface of faucet clean. Pay attention to objects take place when you do not bump or pressure to prominent.
Note four: Pure water impurities when amount of water reduced in the pressure of not less than 0.02mpa circumstances, if we find out the amount of water reduced, there may be blocked inside the faucet. The solution is to use wrenches at the head of the outlet at the next Tap lightly twisted mesh cover, and then carefully clean the impurities installed, generally can be resumed as ever had.
